-
Arrange the Six Sigma DMAIC stages in the correct order:<br>A. Control<br>B. Measure<br>C. Define<br>D. Improve<br>E. Analyse
- C, E, B, D, A
- C, A, B, D, E
- C, B, E, D, A
- B, C, D, E, A
<b>Correct sequence: C → B → E → D → A</b><br><br>Six Sigma follows the DMAIC methodology:<br>1. Define – Identify the problem and project objectives.<br>2. Measure – Measure current process performance.<br>3. Analyse – Identify the root causes of problems.<br>4. Improve – Implement solutions to improve performance.<br>5. Control – Monitor and sustain the improvements. -
Arrange the stages of the System Development Life Cycle (SDLC) in the correct logical sequence:<br>A. Testing & Integration<br>B. Feasibility Study<br>C. Requirement Analysis<br>D. System Design<br>E. Deployment & Maintenance
- B, C, A, D, E
- C, A, E, B, D
- A, E, C, D, B
- B, C, D, A, E
<b>Correct sequence: B → C → D → A → E</b><br><br>1. Feasibility Study – Determines whether the proposed system is technically and economically viable.<br>2. Requirement Analysis – Identifies and documents user requirements.<br>3. System Design – Develops the system architecture and specifications.<br>4. Testing & Integration – Tests individual components and integrates them into a complete system.<br>5. Deployment & Maintenance – Implements the system and provides ongoing support. -
Arrange the steps involved in creating entries using PRECIS in the correct sequence:<br>A. Preparation of lead and display lines<br>B. Selection of indexing terms and concept analysis<br>C. Generation of see and see also reference entries<br>D. Assignment of numerical role operators<br>E. Shunting and permutation of terms
- B, A, C, E, D
- C, D, A, B, E
- D, E, B, A, C
- B, D, E, A, C
<b>Correct sequence: B → D → E → A → C</b><br><br>1. Selection of indexing terms and concept analysis – Identifies the important concepts and their relationships.<br>2. Assignment of numerical role operators – Assigns operators to indicate the functions of indexing terms.<br>3. Shunting and permutation – Reorganises terms to produce different indexing entries.<br>4. Preparation of lead and display lines – Produces the required indexing displays.<br>5. Generation of references – Creates see and see-also references to guide users. -
Arrange the steps of a Reference Interview in the correct sequence:<br>A. Clarifying the information need<br>B. Establishing rapport / greeting<br>C. Formulating the search strategy<br>D. Locating and presenting information<br>E. Follow-up and evaluation
- A, B, C, D, E
- B, A, D, C, E
- B, A, C, D, E
- B, C, A, D, E
<b>Correct sequence: B → A → C → D → E</b><br><br>1. Establishing rapport – Welcomes the user and creates a comfortable environment.<br>2. Clarifying the information need – Understands the actual information requirement.<br>3. Formulating the search strategy – Selects appropriate search terms and resources.<br>4. Locating and presenting information – Retrieves and provides relevant information.<br>5. Follow-up and evaluation – Checks whether the user's information need has been satisfied. -
Arrange the steps of the Scientific Research Process in the correct logical order:<br>A. Formulation of Hypothesis<br>B. Literature Review<br>C. Data Analysis & Interpretation<br>D. Identification of Research Problem<br>E. Research Design & Data Collection
- D, B, A, E, C
- B, C, D, E, A
- D, C, B, A, E
- A, D, E, C, B
<b>Correct sequence: D → B → A → E → C</b><br><br>1. Identification of Research Problem – Identifies the issue or knowledge gap to be investigated.<br>2. Literature Review – Examines existing studies and identifies research gaps.<br>3. Formulation of Hypothesis – Develops a tentative and testable proposition.<br>4. Research Design & Data Collection – Plans the methodology and collects relevant data.<br>5. Data Analysis & Interpretation – Analyses the collected data and interprets the findings. -
Arrange the following technologies in increasing order of their typical communication or reading range, from shortest to longest:<br>A. Bluetooth<br>B. NFC<br>C. Satellite / Cellular<br>D. Wi-Fi<br>E. High Frequency RFID
- B, E, A, D, C
- E, B, A, D, C
- B, A, E, D, C
- A, B, D, E, C
<b>Correct sequence: B → E → A → D → C</b><br><br>1. NFC – Very short-range communication, typically a few centimetres.<br>2. High Frequency RFID – Short-range radio-frequency identification, with range depending on the system.<br>3. Bluetooth – Short-range wireless communication.<br>4. Wi-Fi – Wireless local area networking, generally covering a wider area than Bluetooth.<br>5. Satellite / Cellular – Supports communication over much larger geographical areas.<br><br><i>Note: This is an approximate teaching sequence; actual ranges depend on technology standards, power and environmental conditions.</i> -
Arrange the following steps of Chain Indexing in the correct sequence:<br>A. Deriving Subject Headings from each digit/link<br>B. Arranging the headings in alphabetical order<br>C. Representing the subject by a Class Number<br>D. Preparing cross-reference index entries<br>E. Identifying Sought, Unsought, and False links
- D, A, E, C, B
- C, A, B, D, E
- C, E, A, B, D
- B, C, A, D, E
<b>Correct sequence: C → E → A → B → D</b><br><br>1. Representing the subject by a Class Number – Establishes the classification notation for the subject.<br>2. Identifying links – Examines the chain and distinguishes sought, unsought and false links.<br>3. Deriving Subject Headings – Derives headings from the significant sought links.<br>4. Arranging headings alphabetically – Provides systematic alphabetical access.<br>5. Preparing cross-references – Creates references to guide users to related or preferred headings. -
Arrange the elements of an ISBN-13 in the correct sequence:<br>A. Registrant element (Publisher)<br>B. Prefix element (GS1 prefix 978 or 979)<br>C. Check digit<br>D. Publication element (Title)<br>E. Registration group element (Country/Language)
- B, E, A, D, C
- B, A, E, D, C
- E, B, A, D, C
- B, E, D, A, C
<b>Correct sequence: B → E → A → D → C</b><br><br>1. Prefix element – The GS1 prefix, usually 978 or 979.<br>2. Registration group element – Identifies the country, geographical region or language area.<br>3. Registrant element – Identifies the publisher or imprint.<br>4. Publication element – Identifies a particular publication or edition.<br>5. Check digit – The final digit used to validate the ISBN.<br><br><i>Note: ISBN-13 is a variable-length element structure, with the check digit calculated using the preceding 12 digits.</i> -
According to Colon Classification, which of the following combinations of Main Classes have levels but no rounds?
- z-Generalia, O-Literature, Z-Law
- C-Physics, I-Agriculture, X-Economics
- B-Mathematics, P-Linguistics, Z-Law
- 2-Library Science, E-Engineering, I-Botany
The correct answer is Option 1: z-Generalia, O-Literature and Z-Law.<br><br>In Colon Classification, rounds and levels are concepts associated with the facet structure of a subject. The distinction concerns the arrangement and repetition of facets in the classification schedule. -
Arrange the following selected canons of characteristics and succession in the correct sequence:<br>A. Canon of Relevance<br>B. Canon of Relevant Succession<br>C. Canon of Concomitance<br>D. Canon of Differentiation<br>E. Canon of Ascertainability
- A, B, C, D, E
- D, A, E, C, B
- B, A, C, D, E
- A, D, E, B, C
<b>Correct sequence: D → A → E → C → B</b><br><br>1. Canon of Differentiation – Characteristics should distinguish one entity from another.<br>2. Canon of Relevance – Characteristics selected should be relevant to the purpose of classification.<br>3. Canon of Ascertainability – Characteristics should be clearly ascertainable.<br>4. Canon of Concomitance – Characteristics that occur together should be considered in relation to one another.<br>5. Canon of Relevant Succession – Characteristics should follow a relevant and logical order.<br><br><i>Note: The first three are Canons for Characteristics; the last two are Canons for Succession of Characteristics. This is a selected sequence, not the complete set of canons.</i>
Home
UGC NET December 2025 Library and Information Science Paper 2 (1-10)
No comments:
Post a Comment